| Specification | Description |
|---|---|
| Control | Fanuc 0i-TC CNC |
| Capacity | |
| Max. Turning Length | 23.62" |
| Max. Swing Over Bed | 17.72" |
| Max. Turning Diameter | 9.84" |
| Distance Between Centers | 25.59" |
| Spindle | |
| Max. Spindle Speed | 4800 RPM |
| Spindle Nose | A2-6 |
| Bar Capacity | 2.03" |
| Chuck Diameter | 8" |
| Spindle Motor Direct Drive | 15/20HP |
| Spindle Diameter | 3.9" |
| Spindle Bore | 2.4" |
| Turret | |
| Number of Stations | 12 |
| Turning Tool O.D. / I.D. | 0.75" / 1.25" |
| X-Axis | |
| Travel | 5" |
| Rapid Traverse Rate | 1180 ipm |
| AC Servo Motor | 2.1HP |
| Ballscrew | 1.26" x P0.39" |
| Z-Axis | |
| Travel | 24.8" |
| Rapid Traverse Rate | 1417 ipm |
| AC Servo Motor | 2.1HP |
| Ballscrew | 1.26" x P0.47" |
| Tailstock | |
| Tailstock Travel | 15.75" |
| Quill Diameter | 2.76" |
| Quill Travel | 3.94" |
| Quill Taper | MT#4 |
| Guideway | Linear |
| Power Requirements | 220 V / 3PH / 60Hz / 80 AMP |
| Dimensions | 122" L x 54.33" W x 67.56"H |
| Weight | 7,700 lbs. |
American Commercial Trading, Inc (ACT)
2424 Cypress Way
Fullerton, CA 92831
714-441-1992
714-441-1923
act@actmachinery.com