| Specification | Description |
|---|---|
| Drills to Center of Circle | 26" |
| Drilling Capacity in Cast Iron | 1 3/4" |
| Drilling Capacity in Mild Steel | 1 1/2" |
| Spindle Travel | 7 7/8" |
| Diameter of Spindle in Quill | 1-9/16" |
| Diameter of Quill | 3-1/8" |
| Spindle Taper | #4 MT. |
| Spindle Speeds (8) | 48,96,154,240,307,480,792,1584 |
| Power Feed per Spindle Revolution (4) | .004", .008", .012", .016" |
| Column Diameter | 6-1/8" |
| Oil Coolant Channel and Side Clamping Plate | 24"x20" |
| Side Plate | 20"x7" |
| Spindle Nose to Table | |
| Minimum | 0" |
| Maximum | 32 3/4" |
| Spindle Nose to Base | |
| Minimum | 35" |
| Maximum | 49 1/2" |
| Head Travel on Prismatic Column | 14 1/2" |
| Overall Floor Base | 20"x 31 1/4" |
| Working Surface Floor Base | 15"x16" |
| Weight | 1,210 lbs. |
| Motor Speed (2) Hi-Low | 3.6/3 HP |
| Electrics | 220V, 3PH, 60 CYC |
American Commercial Trading, Inc (ACT)
2424 Cypress Way
Fullerton, CA 92831
714-441-1992
714-441-1923
act@actmachinery.com
|