| Type of CNC Control |
Fanuc Series 31i |
| # Axis |
3 |
| X-Axis Travel mm (in) |
1,524 (60.00) |
| Y-Axis Travel mm (in) |
700 (27.55) |
| Z-Axis Travel mm (in) |
610 (24.01) |
| Working Surface mm (in) |
1,700 x 700 (66.92 x 27.55) |
| Loading Capacity kg (lb) |
2,000 (4,400) |
| Spindle Motor |
AC 26/30 (high-speed winding: continuous/30 min) |
| Spindle Taper |
CT50 |
| Spindle Speed Range min-¹ |
50 - 15,000 (Grease Lubrication) |
| Max. Spindle Torque |
350 / 600min-¹ |
| Number of Tools |
30 ATC |
| Tool Selection |
Memory Random |
| Tool Change Arm |
Double Grip Type |
| Electrical Power Supply kVA |
43 (varies with option configuration) |
| Power Supply Voltage |
AC 200/220 ± 10% (Transformer required if supply voltage is other than) |
| Power Supply Frequency Hz |
50/60 ± 1 |
| Compressed Air Supply MPa |
0.54 - 0.93 |
| Coolant Tank Capacity L |
300 |
| Oil Coolant Tank Capacity: L |
36 |
Equipped With
Fanuc 31iB Control. 15,000 RPM, CAT50. 30 Tool Magazine Drum Type. Additional Work Piece Coordinate 300 prs. Program Restart. Tool Life Management. High Speed Skip. 999 Tool Offsets Pairs. Optional Block Skip 9. Coordinate System Rotation. Part Program Storage 8Mbyte. Common Variable Expansion 100-199/500-999. Spiral Chip Conveyor. Lift-up Hinge Type Chip Conveyor. Remote Manual Pulse Generator. 1,000 Block Look Ahead. ATS / Cool Jet 70-36V HPC Vari flow 1,00 PSI. 4th Axis Option, 4th Axis Electronics. RNA-321R Fanuc Spec.
