| X-Axis Travel | 24 inches |
| Y-Axis Travel | 16 inches |
| Z-Axis Travel | 16 inches |
| Spindle Nose to Table (~ max) | 20.0 in |
| Spindle Nose to Table (~ min) | 4.0 in |
| Spindle Max Rating | 30 HP |
| Spindle Max. Speed | 10,000 rpm |
| Spindle Max Torque | 90.0 ft-lbf @ 2000 rpm |
| Spindle Drive System | Inline Direct-Drive |
| Spindle Taper | CT40 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Liquid Cooled |
| B-Axis - Tilt: Travel | 120 ° to 35- ° |
| C-Axis Travel: Rotation | 360 ° |
| C-Axis Max Part Swing | 18.0 in |
| Tool Changer Capacity | 30+1 |
| Max Weight on Platter | 500 lb |
| Max Cutting | 650 ipm |
| Feedrates: Rapids on X-Axis | 900 ipm |
| Feedrates: Rapids on Y-Axis | 900 ipm |
| Feedrates: Rapids on Z-Axis | 900 ipm |
| Tool Changer Type | SMTC |
| Coolant Thru Spindle | yes |
| Dimensions (LxWxH) | 115" x 90" x 99" |
| Weight | 13500 pounds |
Haas UMC-500 5-Axis Vertical Machining Center 2022 equipped with 10,000 RPM Spindle, 30+1 Tool ATC, High-Speed Machining, 95 Gallon Coolant Tank, CDF Belt-Type Chip Conveyor, Chip Strainer Tray Filter, Air Regulator, Tooling
Short Terms and Conditions of Sale (Please contact us for complete Terms and Conditions): Unless otherwise posted, all items are sold AS-IS, WHERE-IS With All Faults. All specifications and locations are subject to change without notice. All items are subject to availability and prior sale.
ACT Machinery
2424 Cypress Way
Fullerton, Ca 92831
Financing Available / Se Habla Español