| Control | MAX 5 |
| Travel (X, Y, Z) | 20.5" x 17.7" x 15.8" |
| Table Working Surface | 19.7" diam. |
| Maximum Table Load | 550 lbs. |
| Spindle Nose to Table | 5.9" - 21.7" |
| C Axis Motion | 360 degree |
| B Axis Motion | -110/+110 degrees |
| Coolant Capacity | 84.5 gallons |
| Floor to Table Surface | 34.1" |
| Spindle | VC500i |
| Spindle Taper | CAT40 |
| Spindle Speed | 12,000 rpm |
| Spindle Motor Horsepower | 10HP @1,450 rpm (peak) |
| Spindle Torque | 35.3 ft. lbs. (peak) |
| Motion | VC500i |
| Feedrates: Rapid traverse X-Axis / Y-Axis / Z-Axis | 945 ipm |
| Max Programmable Feedrate | 945 ipm |
| Least Command Increment | .0001" |
| B Axis Feed Rate | 25 rpm |
| C Axis Feed Rate | 25 rpm |
| Positioning Accuracy | (10 pass VDI 3441 Method) +/- .0002" |
| Repeatability | (10 pass VDI 3441 Method) +/- .0001" |
| Automatic Tool Changer | VC500i |
| Number of stations | 30 |
| Tool to Tool ATC Time | 2.5 Seconds |
| Maximum Tool Diameter | 3.1" |
| Maximum Tool Length | 9.8" |
| Maximum Operating Dimensions | 163" x 141.9" x 115.3" |
| Machine Weight | 18,520 lbs. (approx.) |
| Voltage | 230 VAC +/- 5% |
| Air Requirements | 3-15 CFM @ 80-100 psi |
Hurco VC500i 5-Axis CNC Mill (2021) with Integrated ProCobot Robot Arm & Drawer System
Short Terms and Conditions of Sale (Please contact us for complete Terms and Conditions): Unless otherwise posted, all items are sold AS-IS, WHERE-IS With All Faults. All specifications and locations are subject to change without notice. All items are subject to availability and prior sale.
ACT Machinery 2424 Cypress Way, Fullerton, Ca 92831
Financing Available / Se Habla Español
Before buying, let us know if you need shipping quotes